SFS 31 Milan

Fans and Thermals.
User avatar
Noël Rumers
Posts: 212
Joined: 20 Mar 2015, 10:29

Re: SFS 31 Milan

Postby Noël Rumers » 11 Jun 2017, 11:26

...when all was grinded to shape, the hinges were the next thing to build in.
Due to the measurements I was able to point out the exact location for the slots to be cut.
This was perfect and spot on so I could fit the bottom hinge first.
This was done by 2.5 mm rivets like I always do. To pull the rivet I had drilled out the back to make sure all would be flush with the ply to fit the fuselage afterwards.

Noël
Attachments
2017 0088Milan rudder.JPG
2017 0089Milan rudder.JPG
2017 0090.1Milan rudder.JPG
2017 0090.2Milan rudder.JPG
2017 0090.3Milan rudder.JPG
2017 0090.5Milan rudder.JPG
2017 0091Milan rudder.JPG
2017 0093Milan rudder.JPG
2017 0094Milan rudder.JPG
2017 0095Milan rudder.JPG

User avatar
Noël Rumers
Posts: 212
Joined: 20 Mar 2015, 10:29

Re: SFS 31 Milan

Postby Noël Rumers » 11 Jun 2017, 11:36

...with the bottom hinge in place the top one had to be positioned too.
This one was marked and cut out to be glued in with 5 min epoxy mixed with Aerosil and micro balloons. This way it hardens much better out to solid and stays that way for even. Also one can grind it easy after a few more min.
Note that the moving part was also covered with 0.4 mm ply strips and cap strips.

So far so good, now we will see what happens next, with holidays to come...
Noël
Attachments
2017 0096Milan rudder.JPG
2017 0097Milan rudder.JPG
2017 0098Milan rudder.JPG
2017 0099Milan rudder.JPG
2017 0103Milan rudder.JPG
2017 0104Milan rudder.JPG
2017 0105Milan rudder.JPG
2017 0102Milan rudder.JPG

User avatar
Peter Balcombe
Posts: 454
Joined: 18 Mar 2015, 10:13
Location: Clevedon, North Somerset, U.K.

Re: SFS 31 Milan

Postby Peter Balcombe » 11 Jun 2017, 12:10

Very nice Noël,
Hopefully another model to bring to Middle Wallop in October?


Return to “Motor Gliders”

Who is online

Users browsing this forum: No registered users and 1 guest