• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

ka8 electrified

Fans and Thermals.
Jolly Roger
Posts: 573
Joined: 30 May 2015, 20:35
Location: Sutton Bank, North Yorkshire

Re: ka8 electrified

Post by Jolly Roger »

mick a wrote:thankyou very much gents
its really helpful , will have a look at the turnigy
as im a nitro dinosour so understand that bit
is it around 100 w per lb i need ?
or could i get away with 70w per lb
thanks again for all your help
mick
Not wishing to contradict others, but I think 70W/lb is plenty for your relatively lightly loaded, high-lift sectioned model, providing the prop diameter is reasonable and the grass isn't too long. My 30lb Super Cub leaps into the air on <70W/lb. Go for 100W only if you want a healthy safety margin of power, but either move up to 8s+ or if sticking with 6s remember the batteries/ESC/motor will have to deal with 100A.

Rog
mick a

Re: ka8 electrified

Post by mick a »

Thank you gents
I was trying to get pic on but all to big

Not too big by any means, not sure why you had a problem. BC
Attachments
image1.JPG
image2.JPG
Post Reply