• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

Grapner/JR mx-16s 35Mhz to 2.4Ghz conversion, any thoughts?

Discussion about Tx, Rx, Servo's, Batteries, Chargers, and all the other things we like to talk about..
Moderator: VinceC
User avatar
Bernie
Posts: 24
Joined: 10 Mar 2015, 16:40
Location: West Sussex
Contact:

Re: Grapner/JR mx-16s 35Mhz to 2.4Ghz conversion, any thoughts?

Post by Bernie »

Hi Chris

Just thought I would throw this in the thought process, the Jeti TU module will fit the MX16s rock solid signal, not the cheapest but its not designed to be :roll:

Not ever fitted one in the MX16s, but there is a photo on the jeti site which can be seen here http://www.jetimodel.com/en/Tx-Module-Installation/

more info can be found here on prices http://www.esoaringgadgets.co.uk/index. ... Path=46_83

If you want any further details then just ask

Bernie :twisted:
Bernie :twisted:
Jeti UK, Esoaring Gadgets, Valenta Models, Let Models, RC Electronics, Aerobtec, Schambeck Motors.

Visit JETI UK
Chris Wynn
Posts: 55
Joined: 18 Mar 2015, 19:11
Location: Stonehenge

Re: Grapner/JR mx-16s 35Mhz to 2.4Ghz conversion, any thoughts?

Post by Chris Wynn »

Thanks for the info Bernie. I'd already gone down the FrSky route before I spotted your reply. All seems well, I guess time will tell, it's good to know there are other options should I choose to go down that road.
Chris.
The other CW...
Post Reply