-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Who is building what for 2017 ?
- Trevor
- Posts: 161
- Joined: 19 Jul 2016, 16:29
- Location: Hampshire
- Contact:
Re: Who is building what for 2017 ?
Wow! I thought that my AV36 was rather lightly built but that looks like a featherweight. Impressive.
Trevor
www.bartonhewsons.uk
www.bartonhewsons.uk
- Olli
- Posts: 26
- Joined: 24 Mar 2015, 17:09
- Location: Germany
- Contact:
Re: Who is building what for 2017 ?
Hi,
Yes it`s featherweight
The fuselage weigh 2.500g an one wing 1.750g at 5,60m wingspan.
Best Regards Olli
Yes it`s featherweight
The fuselage weigh 2.500g an one wing 1.750g at 5,60m wingspan.
Best Regards Olli
-
- Posts: 275
- Joined: 18 Mar 2015, 14:29
- Location: Gloucestershire
Re: Who is building what for 2017 ?
Here's our club room build, should be flying in the spring.
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Who is building what for 2017 ?
Is that the 1/4 scale CW version Frank?
Looks good
Looks good
-
- Posts: 275
- Joined: 18 Mar 2015, 14:29
- Location: Gloucestershire
Re: Who is building what for 2017 ?
1/5th scale Mike Trew version, I'd only had the plan for +25 yearsPeter Balcombe wrote:Is that the 1/4 scale CW version Frank?
Looks good
Fauvette next, maybe, from plan bought at same time.................
- Ray Watts
- Posts: 128
- Joined: 18 Mar 2015, 06:31
- Location: Basingstoke
Re: Who is building what for 2017 ?
Ah yes Frank. Good intentions and all that. I got the ASK 13 plan about that long ago along with the canopy, and was quite excited about flying it as I love swept forward wings. Maybe if and when I retireFrankS wrote:1/5th scale Mike Trew version, I'd only had the plan for +25 yearsPeter Balcombe wrote:Is that the 1/4 scale CW version Frank?
Looks good
Fauvette next, maybe, from plan bought at same time.................
It's always calmer indoors
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Who is building what for 2017 ?
Frank,
Just to whet your appetite, this is my 1/5 scale Fauvette from the Mike Trew plan, although I changed the wing section to HQ and fitted micro servos in each V tail half rather than use the pushrod method on the plan. Aileron & Brake servos also fitted in each wing, rather than fuselage.
Turned out to be reasonable flier.
Just to whet your appetite, this is my 1/5 scale Fauvette from the Mike Trew plan, although I changed the wing section to HQ and fitted micro servos in each V tail half rather than use the pushrod method on the plan. Aileron & Brake servos also fitted in each wing, rather than fuselage.
Turned out to be reasonable flier.
-
- Posts: 275
- Joined: 18 Mar 2015, 14:29
- Location: Gloucestershire
Re: Who is building what for 2017 ?
Peter, very nice, maybe after I've finished the Pat Teakle Vega I've just made a start on (Ray I have the canopy too.......)
- chris williams
- Posts: 1549
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: Who is building what for 2017 ?
Tomáš Váňa has finished his Rhonsperber from the free plan on our website...See, it can done!
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: Who is building what for 2017 ?
I have not started yet. A planned ASW 27 @ 4.3 meters hopefully starting after the dg is finished the plans have been drawn up.A C.W k11 is also planned to be started this autumn should have been already started but have decided to leave till later .