PS. Pic won't download
Ant, You could try uploading it??, or just send it to me.
I think a buddy of mine has one of these, but he has not built it yet...
BC
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
1-1 Gull.
-
Barry_Cole
Re: 1-1 Gull.
I am trying to translate the instructions. Nobody at RT seems to speak any English, to I am gradually putting it through a translator.
RT confirm that this is the correct place for the CG.
More to follow.
RT confirm that this is the correct place for the CG.
More to follow.
- Attachments
-
- CG.pdf
- (96.29 KiB) Downloaded 109 times
-
Jilles
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: 1-1 Gull.
try the link below to determine c.o.g , it works very well
use the two panel wing configuration
You can enter the value of S as a negative figure for forward swept wings sections
Static margin should be entered as 10%
Hope this helps
http://rcplanes.000webhostapp.com/cg2_calc.htm
use the two panel wing configuration
You can enter the value of S as a negative figure for forward swept wings sections
Static margin should be entered as 10%
Hope this helps
http://rcplanes.000webhostapp.com/cg2_calc.htm