-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Who is building what for 2017 ?
-
- Posts: 173
- Joined: 18 Mar 2015, 17:53
Who is building what for 2017 ?
Is this the first year that there hasn't been a 'Who is build what' thread ??
Paul
Paul
Re: Who is building what for 2017 ?
I am building an E-Bergie
CW is building a Super-J-thingy
Motley is building a house...
There you go..
BC
CW is building a Super-J-thingy
Motley is building a house...
There you go..
BC
-
- Posts: 173
- Joined: 18 Mar 2015, 17:53
Re: Who is building what for 2017 ?
What sort of tow plane is Motley using then ?
Paul
Paul
-
- Posts: 93
- Joined: 18 Mar 2015, 06:18
- Location: Blandford Forum
Re: Who is building what for 2017 ?
I have to go through the blueprint with Barry but I think he will call it a " Brickly "
Geoff
Geoff
aka Motley
- terry white
- Posts: 508
- Joined: 18 Mar 2015, 21:08
- Location: wareham,dorset.england
Re: Who is building what for 2017 ?
Hi guys,
Motley was heard to say I don't know whether to make it a high or low winger.
Chris replied I would bung-a-low wing on it. Ter.
Motley was heard to say I don't know whether to make it a high or low winger.
Chris replied I would bung-a-low wing on it. Ter.
Re: Who is building what for 2017 ?
Does it matter he can fly with only 1/2 wing, I saw it
G
G
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Who is building what for 2017 ?
Just to get something smaller on the bench for a change, I am well on with a new PT 1/5 scale Dart.
However, this one has fully sheeted built-up wings which plug in to a short fixed centre wing section to make assembly much easier. After talking to Mr Teakle, the fin area has been increased & the tail feathers/rudder are film covered built-up construction to reduce the overall flying weight.
However, this one has fully sheeted built-up wings which plug in to a short fixed centre wing section to make assembly much easier. After talking to Mr Teakle, the fin area has been increased & the tail feathers/rudder are film covered built-up construction to reduce the overall flying weight.
- Trevor
- Posts: 162
- Joined: 19 Jul 2016, 16:29
- Location: Hampshire
- Contact:
Re: Who is building what for 2017 ?
I'm deep into my first Scale glider build for ages, and my first from plans (unless the motorised T61 counts). It's a Fauvel AV36 and the summary build thread thread is here:
http://scalesoaring.co.uk/phpBB3/viewto ... hilit=AV36
More details on my website here:
http://www.bartonhewsons.uk/home/modelf ... diary.html
As of today, all that stands between me and the covering iron are the last two tricky bits - the canopy and undercarriage!
Trevor
http://scalesoaring.co.uk/phpBB3/viewto ... hilit=AV36
More details on my website here:
http://www.bartonhewsons.uk/home/modelf ... diary.html
As of today, all that stands between me and the covering iron are the last two tricky bits - the canopy and undercarriage!
Trevor
Trevor
www.bartonhewsons.uk
www.bartonhewsons.uk
-
- Posts: 42
- Joined: 19 Mar 2015, 07:08
- Location: Cape Town S. Africa
Re: Who is building what for 2017 ?
I have just finished the 1/3rd T 31 from CW's plan. Might not have a big wingspan, but it's a B..... big model!
Re: Who is building what for 2017 ?
Photos William, we need photos....WilliamH wrote:I have just finished the 1/3rd T 31 from CW's plan. Might not have a big wingspan, but it's a B..... big model!
BC