Hi Chris
Just thought I would throw this in the thought process, the Jeti TU module will fit the MX16s rock solid signal, not the cheapest but its not designed to be
Not ever fitted one in the MX16s, but there is a photo on the jeti site which can be seen here http://www.jetimodel.com/en/Tx-Module-Installation/
more info can be found here on prices http://www.esoaringgadgets.co.uk/index. ... Path=46_83
If you want any further details then just ask
Bernie
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Grapner/JR mx-16s 35Mhz to 2.4Ghz conversion, any thoughts?
- Bernie
- Posts: 24
- Joined: 10 Mar 2015, 16:40
- Location: West Sussex
- Contact:
Re: Grapner/JR mx-16s 35Mhz to 2.4Ghz conversion, any thoughts?
Bernie
Jeti UK, Esoaring Gadgets, Valenta Models, Let Models, RC Electronics, Aerobtec, Schambeck Motors.
Visit JETI UK
Jeti UK, Esoaring Gadgets, Valenta Models, Let Models, RC Electronics, Aerobtec, Schambeck Motors.
Visit JETI UK
-
- Posts: 55
- Joined: 18 Mar 2015, 19:11
- Location: Stonehenge
Re: Grapner/JR mx-16s 35Mhz to 2.4Ghz conversion, any thoughts?
Thanks for the info Bernie. I'd already gone down the FrSky route before I spotted your reply. All seems well, I guess time will tell, it's good to know there are other options should I choose to go down that road.
Chris.
Chris.
The other CW...