Hmodel ASH 25 Mi
Posted: 16 Nov 2015, 15:47
As this is just about the electrical installation and final setup for this model, I have posted here rather than the Build Threads - it wouldn't be right to have it sitting alongside the many scratch-built creations including Simon WS' amazing 7.2 metre ASG29 which I was privileged to see progress in the flesh and be present at its maiden.
I have recently acquired a 6.9m Hmodel ASH 25Mi complete with an Axi 4130/16 powered 'up and go' and SM sequencer.
The electronics installation is about 60% complete and I am now in the process of testing the wiring that has been installed so far and drawing the layout on a large A2 sheet stuck on the wall! It will have 18 servos, 2 receivers, 4 batteries, etc, etc, etc so I need to carefully record a decent diagram of the installation to keep track of progress.
I have been reading the Baudis ASW22 thread and am taking note of the setup suggestions posted by Antonia and others and I'm looking forward to comparing notes with her regarding her ASH25.
If anyone has experience of the Hmodel ASH25, they they seem to be quite rare now my example having been hidden away partially completed for a number of years, please pass me any useful comments, good or bad.
The models that were sent to the States seem to have 'died' or have been relegated to attics or basements according to the postings on RCGroups, so any contributions to help me would be gratefully received.
I don't have the 9 page manual for constructing the 25 (I know the manual is 9 pages long as I have seen a photo of page 9 of 9!) so if anyone has one, a scan of it would be really appreciated.
Thanks in advance, Eric
I have recently acquired a 6.9m Hmodel ASH 25Mi complete with an Axi 4130/16 powered 'up and go' and SM sequencer.
The electronics installation is about 60% complete and I am now in the process of testing the wiring that has been installed so far and drawing the layout on a large A2 sheet stuck on the wall! It will have 18 servos, 2 receivers, 4 batteries, etc, etc, etc so I need to carefully record a decent diagram of the installation to keep track of progress.
I have been reading the Baudis ASW22 thread and am taking note of the setup suggestions posted by Antonia and others and I'm looking forward to comparing notes with her regarding her ASH25.
If anyone has experience of the Hmodel ASH25, they they seem to be quite rare now my example having been hidden away partially completed for a number of years, please pass me any useful comments, good or bad.
The models that were sent to the States seem to have 'died' or have been relegated to attics or basements according to the postings on RCGroups, so any contributions to help me would be gratefully received.
I don't have the 9 page manual for constructing the 25 (I know the manual is 9 pages long as I have seen a photo of page 9 of 9!) so if anyone has one, a scan of it would be really appreciated.
Thanks in advance, Eric