-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Who's building what for 2016.
- chris williams
- Posts: 1574
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: Who's building what for 2016.
...and this from Tomáš Váňa, who's Rhonsperber is coming along nicely...
- chris williams
- Posts: 1574
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
-
- Posts: 93
- Joined: 18 Mar 2015, 06:18
- Location: Blandford Forum
Re: Who's building what for 2016.
Ah, pretty as a picture Chris, only twice as pretty coz there's 2 pictures.
Geoff
Geoff
aka Motley
Re: Who's building what for 2016.
Maybe he has built two, it has taken him long enough.....
BC
BC
-
- Posts: 9
- Joined: 19 Mar 2015, 09:44
- Location: Australia
Re: Who's building what for 2016.
Here is another from the Scheibe/Chris Williams series, my Spatz (or Sparrow).
Its progressing nicely and is what I would call an easy build, just a small amount of fettling here and there.
The plan has been quite accurate so far (thanks Chris !)
Plenty of duct tape to keep it together on the jig !
DN
Its progressing nicely and is what I would call an easy build, just a small amount of fettling here and there.
The plan has been quite accurate so far (thanks Chris !)
Plenty of duct tape to keep it together on the jig !
DN
-
- Posts: 8
- Joined: 18 Mar 2015, 00:46
Re: Who's building what for 2016.
I can't believe it! I finally finished and flew the 5M Skylark 4B on which Barry Cole had already done all the hard work. Maiden flight plus 6 more at Middle Wallop last week and it flew like a dream
- chris williams
- Posts: 1574
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
- chris williams
- Posts: 1574
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: Who's building what for 2016.
A side project I have started a cmpro discus. I found this stored away from 7 years ago. It was a good flyer but keeps cracking the fuz. So I have re glassed the fuz and a new steel wing joiner. Also motor and folding prop. I thought this would make a nice model to walk to my local field and fly.