-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Video from your tug...
Video from your tug...
Have a look at this.
If you have any ideas how I can mount the Mobius, to get rid of the shakes, I would be pleased to know.
This one was mounted rigidly, but I have tried rubber mounts, and taping lead to the camera to damp the vibration.
I have seem smooth video from a tug, so it must be possible.
BC
If you have any ideas how I can mount the Mobius, to get rid of the shakes, I would be pleased to know.
This one was mounted rigidly, but I have tried rubber mounts, and taping lead to the camera to damp the vibration.
I have seem smooth video from a tug, so it must be possible.
BC
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Video from your tug...
Change from IC to electric?
-
- Posts: 275
- Joined: 18 Mar 2015, 14:29
- Location: Gloucestershire
Re: Video from your tug...
Barry, have you seen these http://www.banggood.com/3D-Printed-Anti ... AmC58P8HAQ (hobbyking also do a similar one), might do what you need.
Re: Video from your tug...
Yes, I might try one, but they are designed for Quad copters. These have High frequency, low amplitude vibration, where we have low frequency, high amplitude vibrations.
Sill we have to try everything.
BC
Sill we have to try everything.
BC
-
- Posts: 123
- Joined: 18 Mar 2015, 06:29
- Location: Lincolnshire, UK
Re: Video from your tug...
Watching with interest as I now have a Mobius to play with. There are a father and son team who film a lot of the LMA shows including onboard footage and they produce top quality videos, I will try and find out how they do it.
Electric tug....about as much use as a chocolate fireguard if you want to tow more than a couple of times
Electric tug....about as much use as a chocolate fireguard if you want to tow more than a couple of times
-
- Posts: 497
- Joined: 18 Mar 2015, 07:52
- Contact:
Re: Video from your tug...
PoD, Barry
The father and son team are the Coxon's and they attached their cameras to my Klemm at Elvington last year and got some great footage. All they did was to put sticky backed velcro onto the model and use this to attach the cameras. Seemed to work fine and after filming I could pull the velcro off with ease.
There is a video on youtube of the flight, search 1/2 scale Klemm.
AEB
The father and son team are the Coxon's and they attached their cameras to my Klemm at Elvington last year and got some great footage. All they did was to put sticky backed velcro onto the model and use this to attach the cameras. Seemed to work fine and after filming I could pull the velcro off with ease.
There is a video on youtube of the flight, search 1/2 scale Klemm.
AEB
AEB = Aeronautical Energiser Bunny (with thanks to CW)
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Video from your tug...
Pat, the electric suggestion was very tongue in cheek as I never for a moment thought it would be a contender for Barry
I hope you find a suitable mount Barry, but suspect that something suitable for a single cylinder powered model is likely to be a little harder than for John's Klemm as that has a lot more cylinders, making the vibration model rather different.
I hope you find a suitable mount Barry, but suspect that something suitable for a single cylinder powered model is likely to be a little harder than for John's Klemm as that has a lot more cylinders, making the vibration model rather different.
Re: Video from your tug...
I agree Peter. The airframe is a lot stiffer, and has more inertia to absorb the vibration. Also as you say, his nice 5 cylinder radial is much smoother that our singles, and twins, which both have only the one bang per revolution. Nice video though, and a nice display. It was good to watch, as I did play a very very small part in it's construction.
The quest for smooth video will continue.
BC
The quest for smooth video will continue.
BC
-
- Posts: 275
- Joined: 18 Mar 2015, 14:29
- Location: Gloucestershire
Re: Video from your tug...
So that's it then, just re-engine it with a radial