...Hi...
I am back...
Since last time and with good intentions...but the impossible always happens, or Murphy...
But a lot happened since than on my modeling.
We are still no were with that Bug, so as you are, we are as well in a self organize lock down, or better, in a building lock down!
Looks nicer and one can enjoy it much more...
So, a not to short review on the Milan 2 actually.
Milan 1 flies and it has the ZG38 with Fema starter on it.
For Milan 2, I had the old Tartan 44 ready and it fitted in perfectly. But, yes there is always a 3th option.
This came to my mind not that long ago. However this looked a good idea so I went fully for this option.
I did have the motor, bought for another project that I had cancelled. So the ESC was there as well, so why not give it a try.
The parts supplied by the motor were however not fitting the prop, so new parts had to be made.
The prop had to be the Biela scaled prop, a 20 x 10 " prop that I also used on the Milan 1.
So, that said, I designed a few new parts to fit that motor and looked for the materials to start machining...
The new cross had to be made, because the one that came with the motor didn't fit at all.
Than the new propeller shaft was made. The new back plate for the spinner with 10 scaled holes instead of the 2 original once.
A new washer was made as well with the 4 distance pieces to mount the motor to the firewall of the fuselage.
The back plate was fixed to the propeller shaft as well. All was top, lucky thing is that Murphy is somewhere in lock down too
Noël