Don't forget to check your spam folder if you don't get an activation email after joining!!

Electricityfied...!

Fans and Thermals.
User avatar
Barry_Cole
Posts: 1367
Joined: 10 Mar 2015, 09:30
Location: Hampshire UK

Re: Electricityfied...!

Post by Barry_Cole »

FrankS wrote:
terry white wrote:;) Hope he allows for motor cooling air! Ter
It'll have plenty of time for cooling while he thermals around for a couple of hours between motor runs :D
I have dreams like that too. Never happens though...

:( :( :( :(

BC

User avatar
chris williams
Posts: 1159
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: Electricityfied...!

Post by chris williams »

More from Motley...that's the three of us awaiting maiden weather :(

dolly 001.JPG
K8motor fitting 001.JPG
K8motor fitting 002.JPG
K8motor fitting 003.JPG

FrankS
Posts: 308
Joined: 18 Mar 2015, 14:29
Location: Gloucestershire

Re: Electricityfied...!

Post by FrankS »

Interested in the dolly, has it been used before, it look's like it's got quite a high angle of attack, ours keeps the plane almost level so you have to rotate to take off. Is it better to have the dolly set so the plane takes off without any input when it gets to flying speed.

User avatar
Barry_Cole
Posts: 1367
Joined: 10 Mar 2015, 09:30
Location: Hampshire UK

Re: Electricityfied...!

Post by Barry_Cole »

We will let you know after we have tested it........

If and when the weather ever lets up...

BC

Post Reply