-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Baudis Antares 20E
-
- Posts: 329
- Joined: 18 Aug 2015, 20:38
- Location: South Cambs
-
- Posts: 329
- Joined: 18 Aug 2015, 20:38
- Location: South Cambs
Re: Baudis Antares 20E
Electronics fitted. From top to bottom:
- Space for Jeti MGPS
- Jeti REX2 satellite receiver
- Dual Jeti 5800 Power Ion batteries
- Jeti MVARIO vario and expander for MGPS and MSPEED telemetry sensors
- Jeti Central Box 200
- Jeti REX2 satellite receiver
- Powerbox iGyro 3e
Left hand side has Florian Schambeck 150Ncm protection units for tow release and gear servos and a Jeti Single Bec for brake servo protection.
Not in picture on the left hand side is a Powerbox GPS that provides a speed correction factor for the iGyro.
I thought I'd try the iGyro to help with aerotow and solo slope launches. I've had a few close calls solo launching my ASW20 at the slope when wind gusts tilt the wings before I can get my fingers on the controls. The iGyro has gains for each control axis but I'll probably only use roll and yaw correction.
The iGyro only has the signal leads connected to preserve the Jeti Central box servo shorting function. The iGyro gets its power from the Gain and the spare Elevator 2 (backup) inputs.
Phill
- Space for Jeti MGPS
- Jeti REX2 satellite receiver
- Dual Jeti 5800 Power Ion batteries
- Jeti MVARIO vario and expander for MGPS and MSPEED telemetry sensors
- Jeti Central Box 200
- Jeti REX2 satellite receiver
- Powerbox iGyro 3e
Left hand side has Florian Schambeck 150Ncm protection units for tow release and gear servos and a Jeti Single Bec for brake servo protection.
Not in picture on the left hand side is a Powerbox GPS that provides a speed correction factor for the iGyro.
I thought I'd try the iGyro to help with aerotow and solo slope launches. I've had a few close calls solo launching my ASW20 at the slope when wind gusts tilt the wings before I can get my fingers on the controls. The iGyro has gains for each control axis but I'll probably only use roll and yaw correction.
The iGyro only has the signal leads connected to preserve the Jeti Central box servo shorting function. The iGyro gets its power from the Gain and the spare Elevator 2 (backup) inputs.
Phill
-
- Posts: 329
- Joined: 18 Aug 2015, 20:38
- Location: South Cambs
Re: Baudis Antares 20E
Drilled and tapped ballast bars for an angle fitting which attaches to a blind nut behing the fuselage frame.
Phill
Phill
- terry white
- Posts: 508
- Joined: 18 Mar 2015, 21:08
- Location: wareham,dorset.england
Re: Baudis Antares 20E
Hi Phil, Superb installation. Don't fly it, hang it on your lounge wall as an example of modern art. Ter.
-
- Posts: 329
- Joined: 18 Aug 2015, 20:38
- Location: South Cambs
Re: Baudis Antares 20E
terry white wrote:Hi Phil, Superb installation. Don't fly it, hang it on your lounge wall as an example of modern art. Ter.
Haha!
Not sure it would fit. It certainly fills the lounge.
Phill
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: Baudis Antares 20E
A very nice model indeed
-
- Posts: 329
- Joined: 18 Aug 2015, 20:38
- Location: South Cambs
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: Baudis Antares 20E
Well done Phil . when are you planning to maidan?
-
- Posts: 329
- Joined: 18 Aug 2015, 20:38
- Location: South Cambs
Re: Baudis Antares 20E
Hi Roo,
It might be this Sunday - waiting for confirmation from AEB.
Otherwise it could be Middle Wallop in April.
Phill
It might be this Sunday - waiting for confirmation from AEB.
Otherwise it could be Middle Wallop in April.
Phill
Re: Baudis Antares 20E
Hi Phil.
That looks amazing , look forward to seeing it in the flesh as it were.
Best of luck with maiden
Geoff
That looks amazing , look forward to seeing it in the flesh as it were.
Best of luck with maiden
Geoff