• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

SZD - 36 Cobra 15 1:3 scale

Let us all watch your new project progress.
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

On the bottom part of the wing I cut holes for the brakes. Opening for servo is a bit larger here for easier access, because I will insert brakes at the very end.
Attachments
122.JPG
123.JPG
124.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

My supervisor says, that she wants to help... :)
Attachments
125.JPG
126.JPG
User avatar
VinceC
Site Admin
Posts: 613
Joined: 22 Feb 2015, 11:45
Contact:

Re: SZD - 36 Cobra 15 1:3 scale

Post by VinceC »

Time for a Cat Flap in a glider
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

:D
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Same as on the first one, I made edge on which the cover will be tightened.
Attachments
127.JPG
128.JPG
129.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Around the cover, I taped double sided tape, which is only 0,5 - 1 mm thick, then I tightened cover in place.
Attachments
130.JPG
131.JPG
132.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Gap filled with epoxy-microbaloon.
Attachments
133.JPG
134.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

When epoxy hardened, I removed cover and sanded the edge.
Attachments
135.JPG
136.JPG
137.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

On the places, where the servos will be, I sticked in plywood.
Attachments
138.JPG
139.JPG
140.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Servo for airbrakes set in place, with L profile made from alluminium.
Attachments
141.JPG
142.JPG
Post Reply