-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
SZD - 36 Cobra 15 1:3 scale
- Martynk
- Posts: 61
- Joined: 23 Mar 2017, 21:23
- Location: Willaston
- Contact:
Re: SZD - 36 Cobra 15 1:3 scale
Thanks Tom..
Re: SZD - 36 Cobra 15 1:3 scale
Correct yes, it's for elevator servo.
Roughly filled the gap with microballoon around the main wing support.
Roughly filled the gap with microballoon around the main wing support.
Re: SZD - 36 Cobra 15 1:3 scale
I attached rudder handle to the bottom part of rudder, so bottom part is easier to make.
Re: SZD - 36 Cobra 15 1:3 scale
I filled the remaining space with pieces of styrodur and glued them together with polyurethane glue.
Re: SZD - 36 Cobra 15 1:3 scale
Covered the whole surface with 25g glass fiber and 2 extra layers on styrodur part to make it tougher.
Re: SZD - 36 Cobra 15 1:3 scale
Because rudder is quite massive, edges are a bit thicker.
Re: SZD - 36 Cobra 15 1:3 scale
At the end of the stick I put glass fiber and soaked it with epoxy, leveled it up with lathe and made thread so it can be pulled out using screw.