-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
SZD - 36 Cobra 15 1:3 scale
Re: SZD - 36 Cobra 15 1:3 scale
On the bottom part of the wing I cut holes for the brakes. Opening for servo is a bit larger here for easier access, because I will insert brakes at the very end.
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: SZD - 36 Cobra 15 1:3 scale
Time for a Cat Flap in a glider
Re: SZD - 36 Cobra 15 1:3 scale
Same as on the first one, I made edge on which the cover will be tightened.
Re: SZD - 36 Cobra 15 1:3 scale
Around the cover, I taped double sided tape, which is only 0,5 - 1 mm thick, then I tightened cover in place.
Re: SZD - 36 Cobra 15 1:3 scale
When epoxy hardened, I removed cover and sanded the edge.
Re: SZD - 36 Cobra 15 1:3 scale
On the places, where the servos will be, I sticked in plywood.
Re: SZD - 36 Cobra 15 1:3 scale
Servo for airbrakes set in place, with L profile made from alluminium.