• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

SZD - 36 Cobra 15 1:3 scale

Let us all watch your new project progress.
User avatar
Martynk
Posts: 61
Joined: 23 Mar 2017, 21:23
Location: Willaston
Contact:

Re: SZD - 36 Cobra 15 1:3 scale

Post by Martynk »

Thanks Tom..
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Correct yes, it's for elevator servo.


Roughly filled the gap with microballoon around the main wing support.
Attachments
210.JPG
209.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

I attached rudder handle to the bottom part of rudder, so bottom part is easier to make.
Attachments
212.JPG
211.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

I filled the remaining space with pieces of styrodur and glued them together with polyurethane glue.
Attachments
214.JPG
213.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Sanded all together.
Attachments
215.JPG
216.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Covered the whole surface with 25g glass fiber and 2 extra layers on styrodur part to make it tougher.
Attachments
217.JPG
218.JPG
219.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Same on the other side.
Attachments
220.JPG
221.JPG
222.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Because rudder is quite massive, edges are a bit thicker.
Attachments
223.JPG
224.JPG
225.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

At the end of the stick I put glass fiber and soaked it with epoxy, leveled it up with lathe and made thread so it can be pulled out using screw.
Attachments
228.JPG
227.JPG
226.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Rudder roughly finished.
Attachments
230.JPG
229.JPG
Post Reply