Page 13 of 14

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 25 Apr 2018, 06:29
by skyhawk92
Rudder roughly finished.

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 07 May 2018, 07:49
by skyhawk92
Elevator mount, made of GFK plate and axes made from brass.

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 30 May 2018, 08:13
by skyhawk92
Elevator is used as a negative. I've put a tape on the elevator where the elevator mount is going to be, applied few layers of glass fibers and immediately a layer of microbaloon. Then I've placed the elevator mount on the elevator.

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 30 May 2018, 11:59
by terry white
Excellent work again Skyhawk92.

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 30 May 2018, 12:47
by Simon WS
Yes, looking really good...

Simon

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 30 May 2018, 12:50
by skyhawk92
Hopefully, it will fly this year :D

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 13 Jun 2018, 09:17
by skyhawk92
After it dried, I drilled holes for the elevator mount, roughly cut it and draw the position. On the places where screws will be I inserted small tubes and on the upper side a piece of plastic tube and glued it.

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 26 Jul 2018, 09:07
by skyhawk92
Elevator mount fixed in place and checked, how everything together looks.

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 17 Aug 2018, 11:08
by skyhawk92
Mount in place.

Re: SZD - 36 Cobra 15 1:3 scale

Posted: 17 Aug 2018, 11:13
by skyhawk92
Covers for gap.