Don't forget to check your spam folder if you don't get an activation email after joining!!

SZD - 36 Cobra 15 1:3 scale

Let us all watch your new project progress.
skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Aileron sanded and other part of control handles cut.
Attachments
98.JPG
99.JPG
100.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Holes cut out, spacers inserted and aileron set in place.
Attachments
101.JPG
102.JPG
103.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

On the wing side, I glued spacers.
Attachments
104.JPG
105.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

... and reinforced them with epoxy and cotton fibers.
Attachments
107.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

With such an aileron, model response is very good.
Attachments
108.JPG
109.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Both wings put together, so I can see how they fit.
Attachments
110.JPG
111.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Covers for servo and "maintenance" holes...

On a place where the cover will be I made a sketch.
Attachments
112.JPG
113.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

I made a cut 1mm wider than sketch, and a bit more on the corners.
Attachments
114.JPG
115.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Frame on which the cover will be fixed is made of samba wood from Africa.
Attachments
116.JPG

skyhawk92
Posts: 115
Joined: 20 Jan 2017, 06:47
Location: Domzale

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

On the edge of the cover I drilled some holes, a bit smaler than the screw will be. I temporarily taped it in place and drilled holes in the frame too.
Attachments
117.JPG
118.JPG

Post Reply