Page 6 of 14
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 23 Feb 2017, 05:47
by skyhawk92
Holes cut out, spacers inserted and aileron set in place.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 23 Feb 2017, 05:48
by skyhawk92
On the wing side, I glued spacers.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 23 Feb 2017, 05:48
by skyhawk92
... and reinforced them with epoxy and cotton fibers.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 23 Feb 2017, 05:49
by skyhawk92
With such an aileron, model response is very good.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 23 Feb 2017, 05:49
by skyhawk92
Both wings put together, so I can see how they fit.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 28 Feb 2017, 06:03
by skyhawk92
Covers for servo and "maintenance" holes...
On a place where the cover will be I made a sketch.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 28 Feb 2017, 06:04
by skyhawk92
I made a cut 1mm wider than sketch, and a bit more on the corners.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 28 Feb 2017, 06:04
by skyhawk92
Frame on which the cover will be fixed is made of samba wood from Africa.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 03 Mar 2017, 06:13
by skyhawk92
On the edge of the cover I drilled some holes, a bit smaler than the screw will be. I temporarily taped it in place and drilled holes in the frame too.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 03 Mar 2017, 06:13
by skyhawk92
I enlarged holes on the cover and screwed it in place to see how it fits. The gap that remains will be filled later, when other covers are made.