Page 7 of 14
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 09 Mar 2017, 07:20
by skyhawk92
On the bottom part of the wing I cut holes for the brakes. Opening for servo is a bit larger here for easier access, because I will insert brakes at the very end.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 09 Mar 2017, 07:20
by skyhawk92
My supervisor says, that she wants to help...
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 09 Mar 2017, 12:48
by VinceC
Time for a Cat Flap in a glider
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 09 Mar 2017, 19:31
by skyhawk92
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 16 Mar 2017, 06:09
by skyhawk92
Same as on the first one, I made edge on which the cover will be tightened.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 16 Mar 2017, 06:09
by skyhawk92
Around the cover, I taped double sided tape, which is only 0,5 - 1 mm thick, then I tightened cover in place.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 21 Mar 2017, 06:08
by skyhawk92
Gap filled with epoxy-microbaloon.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 21 Mar 2017, 06:09
by skyhawk92
When epoxy hardened, I removed cover and sanded the edge.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 21 Mar 2017, 06:09
by skyhawk92
On the places, where the servos will be, I sticked in plywood.
Re: SZD - 36 Cobra 15 1:3 scale
Posted: 27 Mar 2017, 07:07
by skyhawk92
Servo for airbrakes set in place, with L profile made from alluminium.