SZD - 36 Cobra 15 1:3 scale

skyhawk92 · Post by **skyhawk92** » 08 Dec 2017, 12:05

Corrected radius at the tail a bit.

skyhawk92 · Post by **skyhawk92** » 18 Dec 2017, 08:53

Rudder control surface is made same way as ailerons.

skyhawk92 · Post by **skyhawk92** » 21 Dec 2017, 10:11

Hinges are made same way as on wings except that bearings are also used here.
On front slats are glued.

skyhawk92 · Post by **skyhawk92** » 21 Dec 2017, 10:18

Added carbon fibres at the rear, and covered rest of the rudder.

skyhawk92 · Post by **skyhawk92** » 22 Dec 2017, 10:54

Holes are cut, where the hinges are. Expoxy+microballon is applied on the round part of the rudder and sanded.

skyhawk92 · Post by **skyhawk92** » 03 Jan 2018, 09:04

With elevator, slightly different type of building is used.

skyhawk92 · Post by **skyhawk92** » 03 Jan 2018, 09:07

On the ribs, 3x2mm balsa slats are glued together.

Post by **Martynk** » 03 Jan 2018, 09:12

Lovely build

Some very different build methods there as well. I guess that I will have to wait for the next instalment to see how the underside of the elevator is built

skyhawk92 · Post by **skyhawk92** » 12 Jan 2018, 13:30

There it is

Cover finished and sanded just like on fuselage.

skyhawk92 · Post by **skyhawk92** » 12 Jan 2018, 13:30

On top of it, thinner mix of epoxy and microballons is applied and a 25g glass fiber.

Scale Soaring UK

Scale Soaring UK

SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale