Page 1 of 3

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood**

Posted: 09 Aug 2017, 10:01
by Martynk
This looks superb Cliff. What CAD systems are you using? Its very impressive

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 09 Aug 2017, 10:36
by Martynk
Superb draughting skills - I am very impressed

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 13 Aug 2017, 07:19
by Jilles
Assembly of laser cut items and stringers always goes pretty fast. Adding plankingand other details items slow things a bit.
But that is part of the building a large scale glider.
Result to date looks great make sure things are kept straight and level when adding tail bits and planking. An Obvious remark, but experience tells me you cannot be too critical on that issue

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 13 Oct 2017, 05:02
by Martynk
That looks lovely and an amazingly tidy workspace as well

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 29 Apr 2018, 09:50
by VinceC
This is going to make a nice model. Well done Clive

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 03 Feb 2019, 00:02
by Philip Hickey
DSC_0028.JPG
Hi Cliff, This is my Bergfalke i have built

Image

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 20 Feb 2019, 20:57
by Philip Hickey
DSC_0069.JPG
DSC_0069.JPG
Any Flight details on the model[img]

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 02 Oct 2020, 16:19
by Peter Balcombe
Adam,
I suspect that in common with other ‘short’ laser cut woodie kits, the full Bergfalke kit comprises a plan & set of laser cut formers, ribs etc/other specifically shaped balsa/Liteply/Ply parts.
The builder needs to study the plan to work out what other standard balsa/ply/metal sheet & strip materials are needed to complete the build.
From my experience, any designer (certainly true in Jilles’ case) tends to identify standard wood sizes on the plan, which you can normally get from SLEC/Balsacabin etc. although you may need to splice standard lengths to get the overall length required for wing spar etc.

Peter

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 02 Oct 2020, 17:52
by Cliff Evans
Here you go Adam.

Bergfalke bom.pdf
(850.1 KiB) Downloaded 348 times

Re: Jilles Smits Bergfalke 11_55 built by Clive Learwood

Posted: 02 Oct 2020, 23:30
by Cliff Evans
But aren't models like that? Nothing that is not available from SlecUk!!!