Page 19 of 19

Re: SLINGSBY GULL 3: 1:3.25 scale

Posted: 15 Jan 2018, 07:49
by chris williams
Thanks, Vince...all made possible with your help. Thanks go also to Robbie :)

Re: SLINGSBY GULL 3: 1:3.25 scale

Posted: 25 Feb 2018, 11:29
by chris williams
At last! Finally, a chance to fly the Gull on a hill. Needless to say, despite the windy conditions, the lift died and an emergency landing had to be performed. :roll:

Re: SLINGSBY GULL 3: 1:3.25 scale

Posted: 28 Feb 2018, 10:29
by Martynk
Hi Chris

A little late, but what paint do you use? How do you apply it?

Re: SLINGSBY GULL 3: 1:3.25 scale

Posted: 02 Aug 2019, 20:15
by Knoll53
Don't feel bad about the non-response inasmuch as a fair response might start with the purchase of Supplied Air Respirator System such as this one.
https://www.eastwood.com/hobby-air-ii-half-mask.html
Word on the street is that 2K paint is highly toxic.

Kent

Re: SLINGSBY GULL 3: 1:3.25 scale

Posted: 15 Jul 2020, 16:55
by chris williams
Nearing completion, a scaled-down version of the Gull at 1:3.9