Page 1 of 2

Cliff Charlesworth Reiher II

Posted: 01 Jun 2018, 18:01
by Martin Gough
Thought I would start a build thread of my Reiher II. Not built a model since I was 12 years old a Keil Kraft Chief.
Any advice would be appreciated along the way.
Regards Martin.

Re: Cliff Charlesworth Reiher II

Posted: 02 Jun 2018, 09:52
by Stuart Ward
Looks like you haven't lost any of your building skills.
You might consider covering the plans with plastic to keep them clean and damage free. I use industrial stretch wrap.
Stu

Re: Cliff Charlesworth Reiher II

Posted: 02 Jun 2018, 10:28
by Martin Gough
Thanks Stuart I will look into doing that.
Martin.

Re: Cliff Charlesworth Reiher II

Posted: 03 Dec 2018, 15:18
by Martin Gough
Slow progress but back on it now doing the odd hour here and there.
Done my first ply sheeting to the fuselage after watching the Ghost Squadron video's on how
to do it. Worked out really well quite surprised myself.

Re: Cliff Charlesworth Reiher II

Posted: 08 Dec 2018, 13:27
by Martin Gough
One side of the fuselage now completely ply covered.

Re: Cliff Charlesworth Reiher II

Posted: 08 Jan 2019, 18:20
by Martin Gough
A little more done.

Re: Cliff Charlesworth Reiher II

Posted: 08 Jan 2019, 23:01
by Cliff Evans
Looking good Martin.

Re: Cliff Charlesworth Reiher II

Posted: 20 Mar 2019, 22:17
by Martin Gough
Done a bit more.

Re: Cliff Charlesworth Reiher II

Posted: 22 Mar 2019, 09:21
by John Vella
Martin, are you making your Flettner Tab functional like I have on the Charlesworth K8 ? The detail is not heavy being all ali construction. Regards John.

Re: Cliff Charlesworth Reiher II

Posted: 22 Mar 2019, 09:32
by Martin Gough
Hi John

I have seen another builder who omitted the tab but thought it would be a
nice detail to add in an operational state. Be interesting to see how it effects
the elevator.
How did it work out on your model?

Regards Martin.