Don't forget to check your spam folder if you don't get an activation email after joining!!
Let us all watch your new project progress.
- Posts: 846
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Slowly motivating my self. So I thought I would start to modify my ash 31. There was a few things that I was not happy with so I added a titanium grade 23 joiners. Lowering the weight of more than 600g. Removed some lead outility of the nose. Was not happy with crow only so have made air brakes and fitted. Also not happy with the dihedral so a bit of surgery and removed the carbon joiners and reset with more carbon. For some reason the top veneer has been having small cracking in a few places but is still glued to the carbon and foam. So I have stripped off the vinyl and will glass.