-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
scratch built 7m ASH 31
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: scratch built 7m ASH 31
Wing joiners set in this morning. 18mm steel and 20 mm carbon tube fixed in with epoxy and carbon mix this is to set it it the right place it well then be carbon and epoxy reinforced later.
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: scratch built 7m ASH 31
Leading edge fixed on and carbon tape on top of spar done. Started the outer panels.
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: scratch built 7m ASH 31
Outer wing joiner made up out of steel tube and glass reinforced with carbon.
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: scratch built 7m ASH 31
Bottom veneer skin has been epoxied on and carbon T.E added.
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire