Page 1 of 3

scratch built 7m ASH 31

Posted: 10 Jul 2018, 23:14
by roo Hawkins
Hi, I started this about 6 weeks ago but it has been on hold. I am not planing to do one of my fast builds as I have a PT ASW 20 to do as well. I needed to start this so I can get over the fox build. I built a 5m ASH 31 about 3 years ago. It was OK but I wish I had made it in 1/3 scale. The fuz foam plug has been shaped but not filled and sanded plus the blue foam wing cores have been cut. I will post some more when more has been done.

Re: scratch built 7m ASH 31

Posted: 10 Jul 2018, 23:19
by roo Hawkins
Pictures

Re: scratch built 7m ASH 31

Posted: 10 Jul 2018, 23:21
by roo Hawkins
Wings

Re: scratch built 7m ASH 31

Posted: 11 Jul 2018, 06:58
by Simon WS
Looking good Roo!...

Si

Re: scratch built 7m ASH 31

Posted: 18 Oct 2018, 09:35
by roo Hawkins
Started to do a bit more on this plus I have ordered the glass and epoxy .doing bits in between outher models .to many repairs and builds.

Re: scratch built 7m ASH 31

Posted: 18 Oct 2018, 13:39
by Nigel Argall
Why the blue foam for the wings Roo? Is it just the obvious thing that it is stronger than EPS??

Re: scratch built 7m ASH 31

Posted: 18 Oct 2018, 13:41
by roo Hawkins
It makes a more accurate cut plus it is stronger

Re: scratch built 7m ASH 31

Posted: 18 Oct 2018, 16:10
by roo Hawkins
A bit more done today

Re: scratch built 7m ASH 31

Posted: 18 Oct 2018, 18:41
by Simon WS
Finished next week then Roo?!

Simon

Re: scratch built 7m ASH 31

Posted: 22 Oct 2018, 17:59
by roo Hawkins
Plug is now filled with wilco wall filler.just now need to sand and it is really for glassing