• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

M100S

Let us all watch your new project progress.
User avatar
RobbieB
Posts: 547
Joined: 07 Mar 2015, 22:22
Location: North West

Re: M100S

Post by RobbieB »

Not ready to talk about that yet Brian................

The second photo does show the gap to have closed a little on full up but that is only because the end is unsupported with the tip block removed.
Jolly Roger
Posts: 573
Joined: 30 May 2015, 20:35
Location: Sutton Bank, North Yorkshire

Re: M100S

Post by Jolly Roger »

Suffering aileron-envy here.

Often known to hinge my ailerons using the "Diamond tape" method. Highly technical. ;)

Mesmerising workmanship as ever Robbie.
User avatar
RobbieB
Posts: 547
Joined: 07 Mar 2015, 22:22
Location: North West

Re: M100S

Post by RobbieB »

Thanks for comment Rog.

Don't worry about the 'Diamond' tape, after the last few weeks it has taken on a whole new appeal for me. I'm a fan anyway, used it lots over the years when its been possible.

Had a sport aerobatic model pile into the slope at a trillion mph some years ago - amongst the sea of 'confetti' there were the ailerons still stuck to the top balsa sheeting/glass cloth with 'Diamond' tape. Be very sad when my last roll runs out.
User avatar
RobbieB
Posts: 547
Joined: 07 Mar 2015, 22:22
Location: North West

Re: M100S

Post by RobbieB »

Whoops time - really must concentrate more.

Spot the deliberate mistake:

IMG_0045.JPG

...........and an object lesson in being careful with the scalpel when trimming Diatex:

IMG_0047.JPG

Sod stripping it all off, I'm just going to patch the bay and hide the joint when I paint - it's underneath anyway.
Well that's two, just waiting for number three to come along now. This is doing my legendary, speed of light building no end of good......................
User avatar
RobbieB
Posts: 547
Joined: 07 Mar 2015, 22:22
Location: North West

Re: M100S

Post by RobbieB »

.........but it would take a lot of the pain away Cliff.

Been sorely tempted to put the whole b****y thing through the shredder before now.
User avatar
Philkiteflyer
Posts: 120
Joined: 17 Mar 2015, 21:53
Location: Invercargill, NZ

Re: M100S

Post by Philkiteflyer »

RobbieB wrote: 08 Apr 2019, 21:15 Spot the deliberate mistake:
Uuummmmmm . . .. You used 'Left twisted' servo wire in the right wing ? ? ? :? :? :roll: :roll: :D
BTW, I bet there isn't a fullsize M100 out there that doesn't have any patches . . . a flying one that is. 8-)
You won't see it at 500ft anyway. (the patch I mean :lol: :lol: :lol:

Phillip C
PS:- Do you have a colour scheme picked out yet? I like this one.
https://m100s.jimdo.com/friend-gliders-picture-gallery/
"Keep it simple stupid"
User avatar
RobbieB
Posts: 547
Joined: 07 Mar 2015, 22:22
Location: North West

Re: M100S

Post by RobbieB »

Left hand threaded servo cable - how did I miss that :lol:

I think it will be this one Phil:

m100_2.pdf
(213.28 KiB) Downloaded 253 times
User avatar
Philkiteflyer
Posts: 120
Joined: 17 Mar 2015, 21:53
Location: Invercargill, NZ

Re: M100S

Post by Philkiteflyer »

RobbieB wrote: 10 Apr 2019, 23:51
I think it will be this one Phil:
That'll do nicely. That yellow should be easy to spot in a blue sky.

Phillip C
"Keep it simple stupid"
User avatar
RobbieB
Posts: 547
Joined: 07 Mar 2015, 22:22
Location: North West

Re: M100S

Post by RobbieB »

canopy_templates.JPG

Started giving some thought to the canopy plug - being rather complicated by the rise at the front of the opening. Not quite as straight forward as a conventional cockpit.

It will be out of high density blue foam so I thought I would produce a plug to exactly fit the opening then add the front, rear and bottom extensions to enable the pull, gradually flattening out the rise to a straight base - unless someone can think of a better way.
User avatar
VinceC
Site Admin
Posts: 613
Joined: 22 Feb 2015, 11:45
Contact:

Re: M100S

Post by VinceC »

Stop what you are doing. There is a full size available free and not far away from you Rob
Attachments
Screenshot 2019-04-30 at 09.29.21.png
Post Reply