Page 3 of 4

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 29 Dec 2018, 09:31
by SteveArchibald
Fantastic Build, some nice pictures in there and great references for my next 1/3 scale build

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 29 Dec 2018, 09:59
by john greenfield
4Unlimited wrote: 19 Dec 2018, 13:42 @ John . . . glue received ;)
Sorry I missed your post. Yes, that is the glue I use.

Happy building.

AEB

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 29 Dec 2018, 10:14
by Rick Verver
Just a pictorial update

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 29 Dec 2018, 11:12
by Rick Verver
SteveArchibald wrote: 29 Dec 2018, 09:31 Fantastic Build, some nice pictures in there and great references for my next 1/3 scale build

Thanks and good luck with your build. Keep us posted with your choise of model.

Regards, Rick

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 29 Dec 2018, 23:28
by SteveArchibald
Hey Rick,

I have started a build thread for the Ikarus a Jilles Smit design. The build thread will keep me honest.

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 10 Feb 2019, 22:58
by Rick Verver
Progress is slow at the moment . . .

Cables are all "crossed"

Meaning:
Left servo is for right elevator, right servo is for left elavator
Top side servo arm, connects to lower end of elevator drive
Lower side servo arm, connects to top end of elevator drive
Left hand side, rudder-servo arm, connects to right hand side rudder
Right hand side, rudder-servo arm, connects to left hand side rudder

So all wires/cables runs (without intervering) through the narrow fuselage at the rear

Goal: saving weight of three servo's at the far end of the fuselage, with it saving "some" balance weight in the nose and saving total weight.

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 06 Aug 2019, 10:36
by Rick Verver
Trying to pickup the pace again . . . . . .

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 08 Aug 2019, 17:36
by Rick Verver
Sanding, sanding, sanding, sanding

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 08 Aug 2019, 17:41
by Rick Verver
Aileron servo support and wing hatch

Re: Schneider-Modell H.W.4 Flamingo 6mtr 1:3

Posted: 08 Aug 2019, 17:44
by Rick Verver
Flap servo support and wing hatch