Hi,
I am putting together a 7 meter, Paritech Nimbus 4D that I purchased through John McNamara at Soarstream. John has been brilliant as there were one or two issues with the model which he dealt with very expeditiously. I will try to post as many photos and detail as I can but don't expect this to be a quick build, I am the world's slowest builder!!
At my local field, we do not have a suitable tug available so I have opted for a Schambeck AFT19 to haul the beast aloft so I can take full advantage of all possible flying days available to me.
I also bought the cockpit to fit and a Tailored Pilots, quarter scale pilot, which is brilliant. The Nimbus is at 1:3.75 scale so a 1:4 scale pilot should be too small. The pilot measures 375mm which, even at 1:4 scale, makes him a bit small at around five feet! However, putting him in the cockpit means I cannot close the canopy!! What is happening? I am presuming the cockpit has been made shallower to allow gear to be put under it. So how do I get my pilot in?
That is not the only problem with space as I also need to get in all the paraphernalia for the AFT19.
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Paritech Nimbus 4D**
- Mike Francies
- Posts: 4
- Joined: 18 Jun 2017, 22:43
- Location: Aughton, Lancashire