Don't forget to check your spam folder if you don't get an activation email after joining!!

French Fafnir at 1.2.5 scale

Let us all watch your new project progress.
Philippe Lamisse
Posts: 4
Joined: 14 Apr 2019, 21:10
Location: France

French Fafnir at 1/2.5 SCale

Post by Philippe Lamisse »

Hello all of you.

THe work on my new project has started. Writing in English is very hard for me. My school lesson's are so far ...

My first project was to build the Fafnir based on Vince's plan. But I wanted a bigger one, at 1/2.5 scale. So, my first work is now to make a new design with Solidworks software. The outlines of this design are from Vinces plan. This is my work on the fuselage for the moment.
Modelage fuselage-2.JPG
Philippe
For someone who knows "Retroplane", I'm Clifton on this site.

Martin Gough
Posts: 92
Joined: 03 Mar 2017, 23:21
Location: Cheshire

Re: French Fafnir at 1/2.5 SCale

Post by Martin Gough »

Phillipe a very interesting project
please keep us informed your progress.

Regards Martin.

Philippe Lamisse
Posts: 4
Joined: 14 Apr 2019, 21:10
Location: France

Re: French Fafnir at 1/2.5 SCale

Post by Philippe Lamisse »

Hello,

I have made a mistake. I think this post isn't in the good part of the forum. I think it must be in the part "Build Threads", I'm sorry. Perhaps the admin can make the transfer to the right place.

Some progress on my Fafnir. The model 3D is finished for the outer form. I have began to make the design of the structure for the elevators. Now I'm working on the wing's structure.

Philippe
Attachments
Fafnir - modelage.JPG
Fafnir - modelage-5.JPG
Structure Profondeur - V1-9.JPG

Philippe Lamisse
Posts: 4
Joined: 14 Apr 2019, 21:10
Location: France

Re: French Fafnir at 1.2.5 scale

Post by Philippe Lamisse »

Many Thanks for the move of all my posts.

Post Reply