-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
HW-4 FLAMINGO 1/4 SCALE
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
HW-4 FLAMINGO 1/4 SCALE
I can't quite work out if this is a scaled-down version of my large one, or a scaled-up version of the small one, but either way, the new Flamingo should still be OAP-friendly...
Fuselage construction is the well proven half-shell method. Much quicker and easier than a jig, but care needs to be taken to keep the fuselage straight...
Fuselage construction is the well proven half-shell method. Much quicker and easier than a jig, but care needs to be taken to keep the fuselage straight...
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: HW-4 FLAMINGO 1/4 SCALE
Directly related to this project, Motley's Petrel has undergone the same scaling-up process and is proceeding at a great pace...
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: HW-4 FLAMINGO 1/4 SCALE
The longerons are 5mm sq spruce, my new favourite size. They're shaped at the front with the latest in hi-tec steaming methods. 1.5mm ply planking is applied at the front end. The slots for the little ply transfer plates are cut with the power file......
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: HW-4 FLAMINGO 1/4 SCALE
Once enough of the planking has been applied, and the diagonals added, the half-shell is stiff enough to remove from the board...
-
- Posts: 93
- Joined: 18 Mar 2015, 06:18
- Location: Blandford Forum
Re: HW-4 FLAMINGO 1/4 SCALE
He probably has Cliff but without hardener the paint takes a long time to dry, so a little patience please
Geoff
Geoff
aka Motley
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: HW-4 FLAMINGO 1/4 SCALE
It is but the work of a moment or two to install the opposite side...
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: HW-4 FLAMINGO 1/4 SCALE
Time to add the front part of the top decking, and to make a start on the nose cone...
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: HW-4 FLAMINGO 1/4 SCALE
The anatomy of a nose cone... It takes around five applications of filler to get the job done...
- chris williams
- Posts: 1572
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: HW-4 FLAMINGO 1/4 SCALE
With the temporary liteply formers removed, the interior of the fuselage can now be glassed with glass cloth and polyester resin