Don't forget to check your spam folder if you don't get an activation email after joining!!

PIK-5 1/3 Scale

Let us all watch your new project progress.
Post Reply
Roger-Spragg
Posts: 33
Joined: 23 Mar 2015, 14:29

PIK-5 1/3 Scale

Post by Roger-Spragg »

For a while now Frank Skilbeck and I have been working on a 1/3 scale scratch build of this Finnish Glider.
We've been putting it together in the Newent Model Club room, and as we only meet there two evenings a week in the winter and one in the summer progress has been far from rapid. However we have now reached a milestone, the first assembly of the major elements of the airframe.
We chose the Pik-5 because as many of you will know we like model gliders that are a bit unusual and that we have not seen modelled or at least modelled widely before and that can be a bit problematical from a construction standpoint. We like a challenge!
So here are a few photo's. The wings are near complete, birch veneer over balsa, and yes there is a fair amount of structural wire to keep that fuz straight!
Model RoomF.jpg
Model Room3 7oct19.jpg
PIK-5.jpg
Attachments
Model RoomE.jpg

Roger-Spragg
Posts: 33
Joined: 23 Mar 2015, 14:29

Re: PIK-5 1/3 Scale

Post by Roger-Spragg »

And finally completed and ready to go. Just not sure when.......
Attachments
2020-06-09 15.44.13.jpg
2020-06-09 15.46.30.jpg
2020-06-09 15.43.54.jpg

Post Reply