If you are joining, please check your spam folder for confirmation email

PIK-5 1/3 Scale

Let us all watch your new project progress.
Post Reply
Roger-Spragg
Posts: 31
Joined: 23 Mar 2015, 14:29

PIK-5 1/3 Scale

Post by Roger-Spragg » 24 Oct 2019, 16:06

For a while now Frank Skilbeck and I have been working on a 1/3 scale scratch build of this Finnish Glider.
We've been putting it together in the Newent Model Club room, and as we only meet there two evenings a week in the winter and one in the summer progress has been far from rapid. However we have now reached a milestone, the first assembly of the major elements of the airframe.
We chose the Pik-5 because as many of you will know we like model gliders that are a bit unusual and that we have not seen modelled or at least modelled widely before and that can be a bit problematical from a construction standpoint. We like a challenge!
So here are a few photo's. The wings are near complete, birch veneer over balsa, and yes there is a fair amount of structural wire to keep that fuz straight!
Model RoomF.jpg
Model Room3 7oct19.jpg
PIK-5.jpg
Attachments
Model RoomE.jpg

User avatar
Cliff Evans
Posts: 1786
Joined: 13 Mar 2015, 10:32
Location: Bristol
Contact:

Re: PIK-5 1/3 Scale

Post by Cliff Evans » 24 Oct 2019, 18:20

Very nice! Unusual choice. Great!

Post Reply