• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

SG38 1/4 Scale (Krick)

Let us all watch your new project progress.
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

SG38 1/4 Scale (Krick)

Post by Wayne »

OK so I finally found my way back to the building board to build my long awaited 1/4 scale SG38 which I purchased several years ago.
Attachments
PICT0003.JPG
Last edited by Wayne on 29 Oct 2019, 14:27, edited 2 times in total.
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

All of the instructions for the kit are in German, fortunately when I purchased the kit a few years agao I had the foresight to source a translated version.
So if anyone else is thinking of building one of these you'll more than likely need these translated instructions which can be found here:

Hope this helps.
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

OK so lets start with the fuselage:
Attachments
SG38 - My Build October 2019 (3).JPG
SG38 - My Build October 2019 (4).JPG
Last edited by Wayne on 29 Oct 2019, 14:29, edited 1 time in total.
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

Some of the hardware:
Attachments
SG38 - My Build October 2019 (5).JPG
SG38 - My Build October 2019 (7).JPG
SG38 - My Build October 2019 (8).JPG
SG38 - My Build October 2019 (11).JPG
SG38 - My Build October 2019 (13).JPG
SG38 - My Build October 2019 (21).JPG
SG38 - My Build October 2019 (22).JPG
SG38 - My Build October 2019 (18).JPG
Last edited by Wayne on 29 Oct 2019, 09:08, edited 1 time in total.
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

Fuselage and "A" frame assembly:
Attachments
SG38 - My Build October 2019 (16).JPG
SG38 - My Build October 2019 (17).JPG
SG38 - My Build October 2019 (18).JPG
SG38 - My Build October 2019 (19).JPG
SG38 - My Build October 2019 (20).JPG
SG38 - My Build October 2019 (21).JPG
SG38 - My Build October 2019 (22).JPG
SG38 - My Build October 2019 (23).JPG
SG38 - My Build October 2019 (24).JPG
Last edited by Wayne on 29 Oct 2019, 14:29, edited 1 time in total.
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

Wing centre section:
Attachments
SG38 - My Build October 2019 (36).JPG
SG38 - My Build October 2019 (39).JPG
IMG_6558.JPG
IMG_6560.JPG
IMG_6561.JPG
SG38 - My Build October 2019 (58).JPG
SG38 - My Build October 2019 (62).JPG
Last edited by Wayne on 29 Oct 2019, 10:18, edited 1 time in total.
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

This is Tony:
Attachments
SG38 - My Build October 2019 (42).JPG
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

LOL :lol: Yes I don't hang about, should be done by lunch time 8-)
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

Skid Lamination & Shock Absorbers:

make up lamination spacers and angle pads for Ply, trace out from plan, make template, soak in hot water, glue bend slowly while attaching clamps, leave to dry:
Attachments
IMG_6509.JPG
IMG_6519.JPG
IMG_6521.JPG
IMG_6522.JPG
IMG_6525.JPG
IMG_6527.JPG
IMG_6528.JPG
IMG_6530.JPG
IMG_6539.JPG
IMG_6540.JPG
Wayne
Posts: 89
Joined: 28 Oct 2019, 15:08
Location: South Wales

Re: SG38 1/4 Scale (Krick)

Post by Wayne »

Main wing fixings:
Attachments
SG38 - My Build October 2019 (51).JPG
Post Reply