Noting much special here, sheeting the wing root;
Maybe not the best or most beautiful solution, but this will be the way the elevator struts will be connected:
The wing might be to big for MPX connectors, will have to check..
At the moment I'm orientating on colors and paints.
I have figured that the correct RAF trainer colors are:
BS 381C-627 Light Aircraft grey (RAL850-2 or RAL7038)
BS 381C-537 Signal Red (RAL 450-5)
White
So far no problem. What I am stuck on at the moment is which paint to use. The majority of the Glider will be covered with Oratex which for as I've heard is relatively easy to paint.
I've been told that Epifanes Mono Uretane is a really good 1K paint, which should flow out very well. Though they have few colors and use their own color reference. Oracover has it's own paints which I might consider, but I'm open for any good recommendation !
I've been going through multiple build treads to see how other people paint their gliders, but most treads go from a bare frame to a covered glider and a painted glider in only 3 pics
Te fuselage on my glider will be half ply and half covered with foil. What I wonder is how to deal with the change in surface, going from film (aft) to the ply (front) part. Should I primer/basecoat both to make both surfaces more even? Should I slightly sand the transition from film to ply?
Any recommendations are more than welcome!!