-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
SDZ-8 JAKOLSKA 1/3
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: SDZ-8 JAKOLSKA 1/3
Which one, SP-3675, the yellow one?
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: SDZ-8 JAKOLSKA 1/3
I do know, but my brain won't release the details. Whoops, information retrieved. Wycombe Air Park sometimes known as Booker
Re: SDZ-8 JAKOLSKA 1/3
More progress albeit slowly, part of fin sheeted ( ive not used the PVA heat method before but am impressed ) started routing elevator servo cables and rudder cables I must admit I'm a bit anal when it comes to installing control runs and electrics, comes from being a mech in the RAF.
- Cliff Evans
- Posts: 1033
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: SDZ-8 JAKOLSKA 1/3
Latest Pics from Keith.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
Re: SDZ-8 JAKOLSKA 1/3
Hi first of all my thanks to Cliff for putting my pictures up on the site, I'm having problems with my tablet for some reason.
As you can see I have been working on the tailplane and elevators, all went together well. I did have a small missmatch on the righthand tailplane but sorted with a packing piece.
As for the hatches I have had to enlarge these as I didn't have enough meat on the edges for the servo horn cut out, now sorted.
Hope all are staying safe and building well.
As you can see I have been working on the tailplane and elevators, all went together well. I did have a small missmatch on the righthand tailplane but sorted with a packing piece.
As for the hatches I have had to enlarge these as I didn't have enough meat on the edges for the servo horn cut out, now sorted.
Hope all are staying safe and building well.
-
- Posts: 60
- Joined: 18 Mar 2015, 22:49
- Location: Bracknell