ZUGVOGEL IIIa 1/4.2 SCALE

Post by **chris williams** » 06 Apr 2020, 09:42

With the rudder made up and hinged to the fin, the whole assembly can be glued to the fuselage, thus completing this part of the process...

Post by **Barry_Cole** » 06 Apr 2020, 11:11

Try not to knock it off this time....

BC

Post by **geoff_crew** » 06 Apr 2020, 13:55

Yeah, that'll be known as criminal activity

Geoff

Post by **Barry_Cole** » 06 Apr 2020, 14:37

Next he will be telling us he has run out of servos. Who would do that??

BC

Post by **chris williams** » 06 Apr 2020, 15:10

Just had a visit from the Servo Fairy...

Post by **Barry_Cole** » 06 Apr 2020, 15:57

I know he's a bit short, but that's going a bit far....

BC

Post by **geoff_crew** » 06 Apr 2020, 17:01

Mmmm, obviously going to have to change those shorts

Still, on another note, i wonder if i'll find a couple of quid under my pillow tomorrow morning ????

Geoff

Post by **chris williams** » 07 Apr 2020, 09:48

Moving on now to the wings...pretty conventional stuff: single 15mm wing joiner, and the aileron spar is located by the ends of the sub-ribs...
The ribs are 2.4mm balsa and the main spar 5mm sq spruce.

Post by **chris williams** » 08 Apr 2020, 11:27

That's better, well done Cliff...Time for a dihedral check before committing epoxy...

Post by **Cliff Evans** » 08 Apr 2020, 15:34

You are welcome!

Scale Soaring UK

ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Re: ZUGVOGEL IIIa 1/4.2 SCALE