Don't forget to check your spam folder if you don't get an activation email after joining!!

Painting advice

Let us all watch your new project progress.
User avatar
Peter Balcombe
Posts: 1141
Joined: 18 Mar 2015, 10:13
Location: Clevedon, North Somerset, U.K.

Re: Painting advice

Post by Peter Balcombe »

Seems to be £57 for 750ml at my local stockist!!

Posts: 134
Joined: 24 Apr 2015, 12:15
Location: Rugeley

Re: Painting advice

Post by catwok »

A method I have used with good results is to flatten off the surface that you are painting as close to the masking tape as possible. Then use a product called "Primol", it is a rather smelly product that you wipe on the surface with a cloth. This etches most surfaces and helps adhesion of paint.

Posts: 146
Joined: 18 Mar 2015, 06:19
Location: North Shropshire

Re: Painting advice

Post by SP250 »

Thanks for all the replies and suggestions chaps, much appreciated.
I have now received the "set of pens" in brass, steel and fibreglass from the net, so will be going down that route to key up to the tape edge.
Hoping to maiden this one sometime this year.
Long Mynd is favourite,especially as the Sherlowe and Milson aerotow's may, or may not happen.

John M

Elliot Howells
Posts: 248
Joined: 18 Mar 2015, 08:18
Location: West Wales

Re: Painting advice

Post by Elliot Howells »

Vince, having just spent £100 on rattle cans of 2K that might not be sufficient, I am intrigued by your paint suggestion.

Did you undercoat first or just abrade? I've just used a replacement for Japlac on my tug and it isn't a patch on it - I did some research and it seems international went bump, so presumably AkzoNobel bought the trademark?

Anyway, be very interested to hear, especially with brush application as spraying is not the easiest thing for me to arrange logistically.

Cheers, Ell.

User avatar
Site Admin
Posts: 774
Joined: 22 Feb 2015, 11:45

Re: Painting advice

Post by VinceC »

I lightly abraded the fuselage and the paint seems to have adhered well

Post Reply