Scratch built Slingsby King Kite 1/4

[Bovin]

Peter,
Good to hear that. I feel the same what you mentioned in the last paragraph. It once saved a plane when the connector with the main battery failed.

Best regards, Vincent

[Bovin]

Now I could cover the bottom of the fuselage. I came up with a sanding tool so I could clamp the panels, otherwise my fingers would get cramped

A batten attached to my worktop with a screw clamp , a piece of aluminum angle and two large spring clamps. The sanding went a bit better now.

. Fuselage and panel with glue

, panel in position and secured with a hot iron. wetted with a sponge

bent and secured. After a few days it starts to become a fuselage

. Next is the nose, lots of panels ...
Vincent