Don't forget to check your spam folder if you don't get an activation email after joining!!

Falke T-61A Cliff Charlesworth Plans.

Let us all watch your new project progress.
Post Reply
User avatar
Max Wright
Posts: 134
Joined: 10 Mar 2020, 19:57
Location: Clayton Bay South Australia

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Max Wright »

There is only the right wing plan in the kit, so I took mine to Officeworks and had them scan and flip the page with the wing on it.

Placed against the original, there is only a millimetre in it.

T-61A 38.JPG
T-61A 39.JPG
T-61A 40.JPG

Some of the guys on RCSB are reporting plan sets with both wings drawn and the wings being 15 mm different lengths!

I couldn't be happier with the result. 8-)
Max
Top
User avatar
Max Wright
Posts: 134
Joined: 10 Mar 2020, 19:57
Location: Clayton Bay South Australia

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Max Wright »

B Sharp wrote: ↑
27 Dec 2020, 08:50
 That's coming along nicely Max. There is no need to forget your progress, just use your photos from this build thread.
Brian. :)
Ha ha! Thanks, Brian. :lol:
Max
Top
User avatar
Trevor
Posts: 128
Joined: 19 Jul 2016, 16:29
Location: Hampshire
Contact:
Contact Trevor

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Trevor »

Great to see this coming on well Max, especially after all the angst at the start!
Top
User avatar
Max Wright
Posts: 134
Joined: 10 Mar 2020, 19:57
Location: Clayton Bay South Australia

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Max Wright »

Thanks, Trevor.

I have your site on speed dial. 8-)
Max
Top
User avatar
Bovin
Posts: 90
Joined: 30 Sep 2017, 12:43
Location: Hillegom

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Bovin »

It looks very well :). And a very nice building table!

Vincent.
Top
User avatar
Max Wright
Posts: 134
Joined: 10 Mar 2020, 19:57
Location: Clayton Bay South Australia

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Max Wright »

Thanks, Vincent. 8-)
Max
Top
User avatar
Max Wright
Posts: 134
Joined: 10 Mar 2020, 19:57
Location: Clayton Bay South Australia

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Max Wright »

The left wing is coming along.

The second one is easier - not so much thinking time involved.

T-61A 44.JPG
T-61A 45.JPG

Cheers
Max
Top
User avatar
Trevor
Posts: 128
Joined: 19 Jul 2016, 16:29
Location: Hampshire
Contact:
Contact Trevor

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Trevor »

Max Wright wrote: ↑
03 Jan 2021, 06:52
The second one is easier - not so much thinking time involved.
Beware! The chances of going wrong are also much higher on the second one - for the same reason!
Top
User avatar
Barry_Cole
Posts: 1436
Joined: 10 Mar 2015, 09:30
Location: Hampshire UK

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Barry_Cole »

Trevor wrote: ↑
03 Jan 2021, 09:11
Max Wright wrote: ↑
03 Jan 2021, 06:52
The second one is easier - not so much thinking time involved.
Beware! The chances of going wrong are also much higher on the second one - for the same reason!
Yes, been there, done that.....

:( :( :( :(

BC
Top
User avatar
Max Wright
Posts: 134
Joined: 10 Mar 2020, 19:57
Location: Clayton Bay South Australia

Re: Falke T-61A Cliff Charlesworth Plans.

Post by Max Wright »

OK. I've assembled the second wing to the point where I can attach it to the bit of the fuselage that I have built up.

T61-A 46.JPG
T-61A 47.JPG
T-61A 48.JPG


I figured that I should see if there are any issues which need my attention while I can still make adjustments.

It all fits pretty well, except for where the back of the right wing meets the fuselage rib. There is a bit of a gap, but I can glue on some more balsa and sand it back until it's fair. A simple job.

I went back and had a look at the photo shoot I did on the prototype and I must say - it all looks pretty good.

The sweep of the wings and the dihedral look very convincing - as do the cranks.

Now I can complete the covering, ailerons and spoilers and make the wing bags for protection. :?

Cheers
Max
Top
Post Reply

Return to “Build Threads”