Page 2 of 6

Re: Pat Teakle Asw 22 6m

Posted: 13 Mar 2021, 17:42
by Dave Mackintosh
Thanks for the suggestions chaps. Here are more progress shots of the tail feathers, rough sanded. will finalise servo installation tomorrow,then glass .
I decided on the servo below,8 kilo pull at 4.8v.Should be fine.
Have a fab weekend gentlemen.
tail1.jpg
tail2.jpg
tailcomplete.jpg
ruddpost.jpg
servo.jpg

Re: Pat Teakle Asw 22 6m

Posted: 13 Mar 2021, 17:59
by Peter Balcombe
Where are you planning to put the servo Dave?
In the fin, or will it fit in the tailplane?

Re: Pat Teakle Asw 22 6m

Posted: 13 Mar 2021, 18:18
by Dave Mackintosh
Hi Peter, In the fin with an 80mm x m3 pushrod and metal clevis. Threaded both ends with lock nuts.

Re: Pat Teakle Asw 22 6m

Posted: 13 Mar 2021, 18:44
by Peter Balcombe
Dave Mackintosh wrote: 13 Mar 2021, 18:18 Hi Peter, In the fin with an 80mm x m3 pushrod and metal clevis. Threaded both ends with lock nuts.
👍

Re: Pat Teakle Asw 22 6m

Posted: 14 Mar 2021, 13:30
by Dave Mackintosh
roo Hawkins wrote: 13 Mar 2021, 08:32 Watching. Good luck with the build.
Thanks Roo.

Re: Pat Teakle Asw 22 6m

Posted: 15 Mar 2021, 19:54
by Andrew Ray
Dave Mackintosh wrote: 13 Mar 2021, 18:18 Hi Peter, In the fin with an 80mm x m3 pushrod and metal clevis. Threaded both ends with lock nuts.
Ah, yes. I don't think I'd try a standard servo in the fin :D

Nice job, tidy workshop too.

Re: Pat Teakle Asw 22 6m

Posted: 15 Mar 2021, 22:33
by Dave Mackintosh
Andrew Ray wrote: 15 Mar 2021, 19:54
Dave Mackintosh wrote: 13 Mar 2021, 18:18 Hi Peter, In the fin with an 80mm x m3 pushrod and metal clevis. Threaded both ends with lock nuts.
Ah, yes. I don't think I'd try a standard servo in the fin :D

Nice job, tidy workshop too.
Thanks Andrew.

Re: Pat Teakle Asw 22 6m

Posted: 15 Mar 2021, 22:39
by Dave Mackintosh
Hi folks.
I cnc cut the inner panels tonight, allowing for skin and carbon cuff thickness. I will cut the mid panels tomorrow and sand and prep the inners.
inner.jpg

Re: Pat Teakle Asw 22 6m

Posted: 15 Mar 2021, 23:55
by Cliff Evans
Looks good Dave.

Re: Pat Teakle Asw 22 6m

Posted: 16 Mar 2021, 17:24
by Dave Mackintosh
Cliff Evans wrote: 15 Mar 2021, 23:55 Looks good Dave.
Thanks Cliff.