• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

Cliff Charlesworth Ka3 from LCS**

Let us all watch your new project progress.
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

v-tail servo's symmetrical position
fb18s.jpg
fb18s.jpg (17.29 KiB) Viewed 1323 times
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

v-tail servo's installed in removable tray
fb19s.jpg
fb20s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

Hi Chris,

thank you for your comment, I'll give the 600-800 paper a try
when painting the wings
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

time for an update on the V-tail

2mm wire bent at correct angle
tb1s.jpg
tb1s.jpg (13.54 KiB) Viewed 1325 times
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

2mm wire soldered onto copper plate wire let into the wood, wire and copper plate epoxied to wood
tb2s.jpg
tb3s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

back view
tb4s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

v-tail main spar
tb5s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

hinges reinforced with 0.4 mm ply
tb6s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

2 mm bent wire left and right
tb7.JPG
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

half-rounds, top ones covered in 0.4 mm ply (facing hinges)
tb8s.jpg
Post Reply