aileron cut out and cleaned up
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Cliff Charlesworth Ka3 from LCS**
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
aileron subspar simplified (shortened) and installed
- Cliff Evans
- Posts: 1034
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Cliff Charlesworth Ka3 from LCS
That is coming on well Tony.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
Thanks Cliff,
thanks,
hope this Ka3 will fly this summer!
thanks,
hope this Ka3 will fly this summer!
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
fitting installed on subspar shear webbing (only top spruce glued)
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
fitting (detail)
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
subspar glued
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
aileron hinge (2mm steel wire+1mm dural) let into 2 mm balsa false leading edge
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
back of hinge
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
balsa semi-rounds, rhs: balsa semi-rounds covered in 0.4 plywood