Don't forget to check your spam folder if you don't get an activation email after joining!!

Cliff Charlesworth Ka3 from LCS

Let us all watch your new project progress.
TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

v-tail servo's symmetrical position
Attachments
fb18s.jpg
fb18s.jpg (17.29 KiB) Viewed 193 times

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

v-tail servo's installed in removable tray
Attachments
fb19s.jpg
fb20s.jpg

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

Hi Chris,

thank you for your comment, I'll give the 600-800 paper a try
when painting the wings

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

time for an update on the V-tail

2mm wire bent at correct angle
Attachments
tb1s.jpg
tb1s.jpg (13.54 KiB) Viewed 194 times

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

2mm wire soldered onto copper plate wire let into the wood, wire and copper plate epoxied to wood
Attachments
tb2s.jpg
tb3s.jpg

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

back view
Attachments
tb4s.jpg

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

v-tail main spar
Attachments
tb5s.jpg

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

hinges reinforced with 0.4 mm ply
Attachments
tb6s.jpg

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

2 mm bent wire left and right
Attachments
tb7.JPG

TonyL
Posts: 104
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

half-rounds, top ones covered in 0.4 mm ply (facing hinges)
Attachments
tb8s.jpg

Post Reply