• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

Cliff Charlesworth Ka3 from LCS**

Let us all watch your new project progress.
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

aileron cut out and cleaned up
wb16s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

aileron subspar simplified (shortened) and installed
wb17s.jpg
User avatar
Cliff Evans
Posts: 1032
Joined: 29 Dec 2019, 15:13
Location: Bristol
Contact:

Re: Cliff Charlesworth Ka3 from LCS

Post by Cliff Evans »

That is coming on well Tony.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

Thanks Cliff,

thanks,

hope this Ka3 will fly this summer!
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

fitting installed on subspar shear webbing (only top spruce glued)
wb18s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

fitting (detail)
wb19s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

subspar glued
wb20s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

aileron hinge (2mm steel wire+1mm dural) let into 2 mm balsa false leading edge
wb21s.jpg
wb21s.jpg (19.93 KiB) Viewed 1097 times
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

back of hinge
wb22s.jpg
TonyL
Posts: 129
Joined: 18 May 2021, 18:36
Location: Lyon France

Re: Cliff Charlesworth Ka3 from LCS

Post by TonyL »

balsa semi-rounds, rhs: balsa semi-rounds covered in 0.4 plywood
wb23s.jpg
Post Reply