plywood covered side faces hinges
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Cliff Charlesworth Ka3 from LCS**
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
pre-shaped 0.4 mm plywood covers the aileron leading edge
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
2mm piano wire epoxied into 2mm balsa false leading edge
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
2mm trangular ribs for the airbrake, 0.4 mm plywood ironed on, reinforcement for the drive arm
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
1.5 mm dural drive arm epoxied into place at roughly 45 degrees
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
4 mm leading edge sanded round
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
finished airbrakes light and stiff! 8 grams/piece
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
1.5 mm plyrib reinforcement to take micro-servo
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
rib reinforcement with servo
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
air brake installed, servo installed (top view)