Scale Soaring UK

two skid parts epoxied together and cleaned up

M 5 brass insert made from M 5 screw with M3 allen bolt

M 5 brass insert epoxied into hardwood block

dural strop bolted to ply-balsa ply sandwich of 15 mm thickness

front of skip bolted to fuzz

rear of skip in dural strop

3 mm ply reinforcements between formers 4 & 5, 4 mm balsa reinforcement aft former 5

Finished building the other wing, cut a little jig to sand the leading edge, the ribs look
very simplar to the original Ka 3 profile: Göttingen 549, 14% maximum thickness and a
leading edge defined by only a few points

Both wings covered in DIACOV

3 mm ply reinforcements behind former 5