• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

BERGFALKE IV CABRIO 1:4.7 SCALE**

Let us all watch your new project progress.
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

BERGFALKE IV CABRIO 1:4.7 SCALE**

Post by chris williams »

This has proved itself to be a very practically-sized model & a smooth performer. As far as I know, there are no IV's in this particular configuration, although there seems to be a variety of Bergfalke 3's thus modified. The unusual scale is due to the 1/4 scale version being scaled down to a size that suits existing stock material dimensions. The last minute decision to hide a motor in the fuselage has proved well-founded, as last weeks inaugural slope flights demonstrated in the light conditions...

Construction starts on the jig: note that the longerons are cut longitudinally at the front to ease the curvatures...
P1060946.jpg
P1060947.jpg
P1060948.jpg
P1060949.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

Once all the longerons are in place, the tail mount can be added, and then a template made up for the top sheeting...
P1060950.jpg
P1060951.jpg
P1060952.jpg
P1060953.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

Once the front planking & the top deck are in place, the fuselage can be removed from the jig. Note that there is a slight compound curve at the front of the top decking, hence all the masking tape. An alternative would be to separate the panel at F8...
P1060954.jpg
P1060955.jpg
P1060956.jpg
P1060957.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

To allow for the tapering thickness, the tailplane is built inverted on the board, than sheeted on top. Then it's inverted once again, with jigging supports spot-cyano'ed to the top sheeting, placed back on the board, and the bottom sheeting added...
P1060960.jpg
P1060961.jpg
P1060962.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

The making of the 'cab'...
P1060963.jpg
P1060964.jpg
P1060965.jpg
P1060967.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

With some 5mm sq balsa added to increase the glueing area, the ply side panels are added, followed by the top panels...
P1060968.jpg
P1060969.jpg
P1060970.jpg
P1060971.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

Now, the ply sheeting can be finalised at the front...
P1060972.jpg
P1060973.jpg
P1060975.jpg
P1060978.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

Now the wheel mount can be finalised...
P1060979.jpg
P1060980.jpg
P1060985.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

Now for the elevator: the first job is to hinge up the false LE to the tailplane and sand it flush. It can then be removed, and the elevator built over the plan. Then the final LE is added and rounded off...
P1060981.jpg
P1060982.jpg
P1060983.jpg
P1060984.jpg
User avatar
chris williams
Posts: 1544
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: BERGFALKE IV CABRIO 1:4.7 SCALE

Post by chris williams »

Details of the elevator actuating pushrod arrangement...Now, construction of the fin/rudder starts.
P1060986.jpg
P1060987.jpg
P1060988.jpg
P1060989.jpg
P1060990.jpg
Post Reply